Oneup EDC Lite Tool Black

Oneup EDC Lite Tool Black

Why we stock it

The right mountain bike accessory can make riding, setup or workshop jobs a lot easier. Everything here is part of the range we actually stock in our Rotorua shop, chosen from brands we trust rather than pulled from a supplier feed.

Product details

The Tool You Need

EDC Lite puts the most common tools you need in your hand, when and where you need them. The 9 function multi-tool includes 2, 2.5, 3, 4, 5, 6, 8mm hex, T25 torx and a flat head screwdriver.

EDC LITE COMPATIBILITY

ENSURE YOUR FORK IS COMPATIBLE -VERY IMPORTANT

Incompatible forks: Giant Overdrive 2 Forks. RockShox 35 Series Forks. Cannondale Lefty Forks. Carbon Steerers

STEERER TUBE INNER DIAMETER

The inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If fitting unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.

STEERER TUBE LENGTH  

Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement.

• Fox except Fox 38 = 190mm min
• Fox 38 = 210mm min
• RockShox Forks  = 210mm min

Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.

Questions?

If you're not sure whether this is the right option for you or your bike, get in touch or call into the shop. We'd much rather help you choose the right product than sell you the wrong one.